More Info
Joseph: 56-1/2" x 38"
Baby jesus: 26-1/2" x 19"
Mary: 40" x 24"
Wood:
One 4' x 8' sheet of 3/4" or 1/2" thick exterior grade plywood
Two 2X2 x 48" long boards
Hardware:
Screws - Eighteen #6 x 1-1/4" long, flat head
Stakes - Three 3/8" dia. x 18" long biberglass (3 - #YS18)
Clamps - Six 3/8" w/screws (1 pack of #YSC2)
Hinges - Two heavy duty
Eyescrews - Four 5/16" I.D. (1 pack of #EYE3)
Tie Down Stakes - Eight 3/16" dia. x 10" long steel rods (#TDS)
Tools:
Hand-held sabre saw with a smooth cutting, non-chipping blade, staple gun, electric drill, 3/32", 5/32" and 3/8" dia. drill bits
Note:
All three pieces are attached to a 3-1/2" x 73" board at the bottom, holding them all together, so that the lights are continuously fed through the project.
Paints:White primer (#PRIMQT) for a base coat and the following suggested colors of acrylic paint or exterior semi-gloss enamel:
2506 Black exterior flat latex paint
Sealer (optional): High-grade, non-yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.
Other Supplies:
Lights - Four strands 100 count Clear miniature, 2-1/2" spacing between lights
One strand 50 count Clear, miniature, 2-1/2" spacing between lights
**Winfield does NOT carry the miniature lights. They should be available from your local big box store, Craft store or online thru Bronners.com.
Related Products
Click on the links below for additional product information.