Race Car Sandbox Woodworking Plan

Description: Race car sandbox

Dimensions: 47" wide x 84" long

Wood: One - 4 x 8 sheet of 3/4" thick exterior grade plywood, preferably 5-ply for better stability
Three - 2 x 10 x 96" long boards, #2 or better grade pine

Hardware: Required for assembly
Screws - thirty two #10 x 1-1/2" long, flat head
Ten #10 x 2-1/2" long, flat head
Hinge - four 1-1/2" x 1-1/2", brass

Tools: Hand held sabre saw with a smooth cutting non-chipping, scrolling blade, table saw or circular saw, screwdriver, drill and a 3/16" dia. drill bit

Supplies: Transfer paper, pencil & clear tape
Sand paper - medium & fine grits
Wood filler- non shrinking, fast drying for wood flaws (#WF8)
Paint brush - 3/4" and 1/4" wide brushes and fine tip detail brush

Paints:White primer (#PRIMQT) for a base coat and the following suggested colors of acrylic paint or exterior semi-gloss enamel:
2057-Quaker Grey
2083-Fire Red
2090-Hippo Grey
2505-White
2506-Black

Sealer: High grade, non yellowing, semi-gloss UV protected project sealer (#POLYQT) for outdoor protection.